Diagnostics
Inspection procedure
In this manual: Diagnostics
5steps
~30min
2/5difficulty
Done 0 of 5
1 Check harness and connector(transmission control switch – body ground)




2 Inspect transmission control switch




3 Check harness and connector(transmission control switch – ecm)




Proceed to next circuit inspection shown on problem symptoms table

- Disconnect the transmission control switch connector of shift lever assy.
- measure the resistance according to the value(s) in the table below.
Standard:




- Measure the resistance according to the value(s) in the table below.
Standard:




- Connect the transmission control switch connector of shift lever assy.
- disconnect the ecm connector.
- measure the resistance according to the value(s) in the table below.
Standard:



Test yourself
A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?