Malfunction in clock

1. 1
   Check the continuity in cig fuse.
2. 2
   check the continuity in dome fuse.

   

   

1. 1
   Check voltage.
2. 2
   Remove the clock assy with connector still connected.
3. 3
   Measure voltage between terminal 1 (+b) of clock assy connector and body ground.

Standard voltage: 10 – 14 v

1. 1
   turn the ignition switch to acc.
2. 2
   Measure voltage between terminal 4 (acc) of clock assy connector and body ground.

Standard voltage: 10 – 14 v

1. 1
   check continuity.
2. 2
   Check continuity between terminal 2 (e) of clock assy connector and body ground.

   Ok: continuity exists