Replacement

1. remove the oil pan drain plug and drain the engine oil.

1. remove 2 bolts and chain vibration damper no. 1.

1. 1
   Remove the 5 bolts.
2. 2
   remove the oil pump assy and gasket.

1. 1
   Place a new gasket on the cylinder block.
2. 2
   engage the spline teeth of the oil pump drive rotor with the large teeth of the crankshaft, and side the oil pump.
3. 3
   install the oil pump with the 5 bolts.

   Torque: 9.0 Nvm (92 Kgf·cm, 80 in.Vlbf)

1

1. install the chain vibration damper no. 1 With 2 bolts.

   Torque: 9.0 Nvm (92 Kgf·cm, 8.0 In.Vlbf)

1. clean and install the oil pan drain plug with a new gasket.

   Torque: 37 nvm (377 Kgf·cm, 27 ft·lbf)

Capacity:
drain and refill w/ oil filter change 3.7 Liters (3.9 Us qts, 3.3 Lmp. Qts) drain and refill w/o oil filter change 3.5 Liters (3.7 Us qts, 3.1 Lmp. Qts) dry fill 4.2 Liters (4.4 Us qts, 3.7 Lmp. Qts)