Instrument cluster
Drive information
In this manual: Instrument cluster
~1min read
- Current fuel consumption*1 displays the current rate of fuel consumption
- average fuel economy (after reset*2/after start/after refuel)*1 displays the average fuel economy since the function was reset, the engine was started, and the vehicle was refueled, respectively use the displayed average fuel economy as a reference.
- Average vehicle speed (after reset*2/after start)*1 displays the average vehicle speed since the function was reset and the engine was started, respectively
- elapsed time (after reset*2/after start)*1 displays the elapsed time since the function was reset and the engine was started, respectively
- distance (driving range/after start/after reset*2)*1 displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the engine was started, respectively.
- this distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
- when only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
- Eco driving indicator
- Awd control (if equipped)
Displays the torque distribution between the front and rear axles of the awd control system *1: can be registered to drive information 1 through 3. *2: Resetting procedures:
- select a function to be reset using the meter control switches and then press and hold to reset.
- if there is more than one function that can be reset, check boxes will be displayed next to those functions.
Was this page helpful?