Instrument cluster

Settings display

2steps
~12min
1/5difficulty
Done 0 of 2
Changing the settings
  1. Select using
    the meter control switches.
  2. Select an item and then set it with the center button.
Customizable items
  • Language select to change the language on the display.
  • Units select to change the unit of measure for fuel consumption.
  • Maintenance system (for u.S.A.) Select to reset the maintenance data after the required maintenance is performed.
  • Eco driving indicator light select to activate/deactivate the eco driving indicator light.
  • Switch
    settings you can register 1 screen as the top screen. To register, press and hold while
    the desired screen is displayed.
  • Drive information 1 through 3 select to select up to 2 items that will be displayed on a drive information screen, up to 3 drive information screens can be set.
  • Pop-up display select to set the following pop-up displays, which may appear in some situations, on/off.
    • route guidance display of the navigation system-linked system (if equipped)
    • incoming call display of the hands-free phone system
    • cruise control operation display
    • instrument panel brightness adjustment display
    • accent color select to change the accent colors on the screen, such as the cursor color.
    • Speed limit display* select to set the display of speed limit information stored in the navigation system to on with the speed limit caution indicator (yellow) enabled, on with the speed limit caution not enabled, or off. If enabled, the speed limit caution indicator will come on if the vehicle speed exceeds the displayed speed limit.
    • Initialization registered or changed meter settings will be deleted or returned to their default setting.

    Settings can be changed. (Customizable features: ) *: Speed limit display may not be available for some regions.

    • Pop-up display

    In some situations, such as when a switch operation is performed, a pop-up display, such as the operating cruise control switch, will be temporarily displayed on the multi-information display.

    The pop-up display function can be set on/off.

    • Setting display automatic cancelation

    In the following situations, setting display in which the settings can be changed through the meter control switch will automatically be turned off.

    • When a warning message appears while the setting display is displayed
    • when the vehicle begins to move while the setting display is displayed
    • Liquid crystal display

    Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

    Warning
    The information display at low temperatures

    Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed.

    For example, there is a lag between the driver's shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.

    Cautions during setting up the display

    As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (co) may collect and enter the vehicle. This may lead to death or a serious health hazard.

    Notice
    During setting up the display

    To prevent battery discharge, Ensure that the engine is running while setting up the display features.