Cooling

Inspection

~1min read

1. INSPECT RELAY (Marking: FAN NO. 1, FAN NO. 3)

INSPECT RELAY (Marking: FAN NO. 1, FAN NO. 3)

(a) Measure the resistance of the relay.

Standard:

INSPECT RELAY (Marking: FAN NO. 1, FAN NO. 3)

If the result is not as specified, replace the relay.

2. INSPECT RELAY (Making: FAN NO. 2)

INSPECT RELAY (Making: FAN NO. 2)

(a) Measure the resistance of the relay.

Standard:

INSPECT RELAY (Making: FAN NO. 2)

If the result is not as specified, replace the relay.

3. INSPECT ENGINE COOLANT TEMPERATURE SENSOR

 INSPECT ENGINE COOLANT TEMPERATURE SENSOR

(a) Measure the resistance between terminals 1 and 2.

Standard:

 INSPECT ENGINE COOLANT TEMPERATURE SENSOR

If the result is not as specified, replace the sensor.

NOTICE: When checking the ECT sensor in the water, the terminals should be kept dry. After the check, dry the sensor.