Disassembly

1. REMOVE DRIVE CLUTCH HUB

(a) Using a snap ring expander, remove the snap ring.

(b) Using SST, remove the drive clutch hub.

SST 09950- 40011 (09951- 04020, 09952- 04010, 09953- 04030, 09954- 04020, 09955- 04021, 09957-04010, 09958-04011)

2. REMOVE FRONT OUTPUT SHAFT

Using a plastic hammer, drive out the front output shaft.

3. REMOVE DUST DEFLECTOR

(a) Using SST, remove the dust deflector.

SST 09950- 40011 (09951- 04020, 09952- 04010, 09953- 04030, 09954- 04010, 09955- 04051, 09957-04010, 09958-04011)

(b) Using a screwdriver and hammer, tap the dust deflector and remove it from the extension housing.

4. REMOVE OIL SEAL

Using a screwdriver, pry out the oil seal from the front extension housing.

5. REMOVE BALL BEARING

(a) Using a screwdriver, remove the snap ring.

(b) Using SST and a press, remove the ball bearing.

SST 09316-6001 1 (09316-00011, 09316-00071)