Before driving

Head restraints

2steps
~12min
1/5difficulty
Done 0 of 2

Head restraints are provided for all seats.

  • Front seats
Front seats

Vertical adjustment

  1. Up
  2. Down

Push the head restraint up or down while pressing the lock release button.

Front seats

Angle adjustment

  • Second seats
Second seats

Vertical adjustment

  1. Up

Pull the head restraint up.

  1. Down

Press and hold the lock release button when lowering the head restraint.

  • Third outboard seats
Third outboard seats

To fold

Pull the head restraint angle lever to fold the head restraint.

  • Adjusting the height of the head restraints
Adjusting the height of the head restraints

Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

  • Adjusting the second center seat head restraint

Always raise the head restraint one level from the stowed position when using.

  • Removing the head restraints
  • Front seats
Front seats

Push a flathead screwdriver into the slot.

The slot is located on the right side of the right head restraint anchor.

STEP 2

While pressing in the flathead screwdriver, pull up the head restraint.

  • Second seats
Second seats

Pull the head restraint up while pressing the lock release button.

  • Third center seat
Third center seat

Pull the head restraint up while pressing the lock release button.

  • Third outboard seats
Third outboard seats

Push a flathead screwdriver into the slot.

The slot is located on the left side of the left head restraint anchor.

STEP 2

While pressing in the flathead screwdriver, pull up the head restraint.

  • Installing the head restraints
STEP 1

Align the head restraint with the installation holes.

STEP 2

Push down the head restraint to the lock position.

  • When not using the third center seat head restraint
When not using the third center seat head restraint

Open the zipper on the back of the third seat and stow the head restraint inside.

CAUTION
  • Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.

  • Use the head restraints designed for each respective seat.
  • Adjust the head restraints to the correct position at all times.
  • After adjusting the head restraints, push down on them and make sure they are locked in position.
  • Do not drive with the head restraints removed.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.