Making a phone call

• Making a phone call

• Dialing by inputting a number “Dial by number”
• Dialing by inputting a name “Dial by name”
• Speed dialing
• Dialing a number stored in the outgoing history memory “Redial”
• Dialing a number stored in the incoming history memory “Call back”

• Receiving a phone call

• Answering the phone
• Refusing the call

• Transferring a call
• Call waiting
• Using a call history memory

• Dialing
• Storing data in the phone book
• Deleting

Dialing by inputting a number STEP 1

Press the talk switch and say “Dial by number”.

STEP 2

Press the talk switch and say the phone number.

STEP 3

Dial by one of the following methods:

1. 1
   Press the off-hook switch.
2. 2
   Press the talk switch and say “Dial”.
3. 3
   Select “Dial” using .

Dialing by inputting a name STEP 1

Press the talk switch and say “Dial by name”.

STEP 2

Select a registered name to be input by either of the following methods:

1. 1
   Press the talk switch and say a registered name.
2. 2
   Press the talk switch and say “List names”. Press the talk switch when the desired name is being read aloud.

STEP 3

Dial by one of the following methods:

1. 1
   Press the off-hook switch.
2. 2
   Press the talk switch and say “Dial”.
3. 3
   Select “Dial” using .

Speed dialing STEP 1

Press the off-hook switch.

STEP 2

Press the preset button in which the desired number is registered.

STEP 3

Press the off-hook switch.

When receiving a phone call

• Answering the phone

Press the off-hook switch.

• Refusing the call

Press the on-hook switch.

Transferring a call

A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods:

1. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the operation of the phone.

1. 1
   Press the off-hook switch*1.
2. 2
   Press the talk switch and say “Call Transfer”*2.

*1:This operation can be performed only when transferring a call from the cellular phone to the system during a call.

*2:While the vehicle is in motion, a call cannot be transferred from the system to the cellular phone.

Call waiting

When a call is interrupted by an incoming call from a third party, the following options will become available:

• Answer the incoming call: Press the off-hook switch. (Press the offhook switch again as necessary to switch back and forth between calls.)
• Refuse the incoming call: Press the on-hook switch.

Using the call history memory Follow the procedure below to use a number stored in the call history memory: STEP 1

Press the talk switch and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory).

STEP 2

Select the number by either of the following methods:

1. 1
   Say “Previous” or “Go back” until the desired number is displayed.
2. 2
   Select the desired number using .

STEP 3

The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” using a voice command or .

Storing the number in the phone book: Select “Store” and then “Confirm” using a voice command or .

Deleting: Select “Delete” and then “Confirm” using a voice command or .

• Call waiting

• If your phone does not support HFP Ver. 1.5, this function cannot be used.
• Call waiting operation may differ depending on your cellular phone and service provider.

• Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call history memories.

• When talking on the phone

• Do not talk simultaneously with the other party.
• Keep the volume of the receiving voice down. Otherwise, voice echo will increase.