Toyota Land Cruiser Quiz
Brake

Rear speed sensor

In this manual: Brake
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
010203040501310N·mlb·ft
Tightening torque found on this page

COMPONENTS

COMPONENTS

INSTALLATION

Installation is in the reverse order of removal ( BR-72 ).

HINT: After installation, check the speed sensor signal ( DI-505 ).

REMOVAL

REMOVE SPEED SENSOR

REMOVE SPEED SENSOR
(a) Disconnect the speed sensor connector.

(b) Remove the clamp bolt from the upper control bracket.

Torque: 13 N·m

(c) Remove the 6 resin clips, holding the sensor wire harness from the frame, upper control arm and axle housing.

REMOVE SPEED SENSOR

(d) Remove the mounting bolt and speed sensor.

Torque: 8 N·m

(e) Remove the O-ring from the speed sensoe.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.