Toyota Land Cruiser Quiz
Transfer

Reassembly

In this manual: Transfer
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
3special tools

HINT: Coat all of the sliding and rotating surfaces with gear oil before reassembly.

1. INSTALL FRONT TAPER ROLLER BEARING

INSTALL FRONT TAPER ROLLER BEARING

Using SST and a press, install the front taper roller bearing.

SST 09316-6001 1 (09316-00011, 09316-00031)

2. INSTALL HIGH AND LOW CLUTCH SLEEVE

INSTALL HIGH AND LOW CLUTCH SLEEVE

HINT: Make sure to install the high and low clutch sleeve in the correct direction

3. INSTALL NEEDLE ROLLER BEARING AND IDLER LOW GEAR TO IDLER GEAR

INSTALL NEEDLE ROLLER BEARING AND IDLER LOW GEAR TO IDLER GEAR
(a) Apply gear oil to the needle roller bearing.

(b) Install the needle roller bearing and idler low gear.

4. INSTALL REAR TAPER ROLLER BEARING

INSTALL REAR TAPER ROLLER BEARING

Using SST and a press, install the rear taper roller bearing.

SST 09316-6001 1 (09316-00011, 09316-00071)

5. INSPECT IDLER LOW GEAR RADIAL AND THRUST CLEARANCE ( TR-25 )

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.