Toyota RAV4 Quiz
Other system

Center power outlet socket

In this manual: Other system
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
15steps
~90min
4/5difficulty
Done 0 of 15
Components
Toyota RAV4. Center power outlet socket

Removal
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Remove no. 1 Console upper panel garnish (see page ip-17)
  2. Remove no. 2 Console upper panel garnish (see page ip-18)
  3. Remove shift lever knob sub-assembly
  4. Remove upper console panel sub-assembly (see page ip-18)
  5. Remove upper rear console panel subassembly (see page ip-19)
  6. Remove center power outlet socket assembly
    Toyota RAV4. Remove center power outlet socket assembly

  1. Rotate the socket to disengage the notch.
Toyota RAV4. Remove center power outlet socket assembly

  1. Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.
  2. Remove the socket from the cover.
Installation
  1. Install center power outlet socket assembly
Toyota RAV4. Install center power outlet socket assembly

  1. Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.
  2. Install upper rear console panel subassembly (see page ip-27)
  3. Install upper console panel sub-assembly (see page ip-27)
  4. Install shift lever knob sub-assembly
  5. Install no. 2 Console upper panel garnish (see page ip-28)
  6. Install no. 1 Console upper panel garnish (see page ip-28)
  7. Connect cable to negative battery terminal

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.