Toyota RAV4 Quiz
Supplemental restraint system

Check mode procedure

In this manual: Supplemental restraint system
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
3steps
~18min
2/5difficulty
Done 0 of 3
  1. Check mode (signal check)
Toyota RAV4. Check mode (signal check)

  1. Connect the intelligent tester (with can vim) to the dlc3.
  2. Turn the ignition switch on.
  3. Select the "signal check", and continue checking with the intelligent tester.
Notice:

Select the "signal check" from the "dtc check" screen displayed on the intelligent tester to clear the output dtcs (both present and past).

Hint:
  • Check mode is more sensitive to malfunctions than normal mode.
  • If the normal system code is output in normal mode even when a sensor signal malfunction is suspected, perform the inspection in check mode.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.