Child restraint seat tether anchor

1. Remove child restraint seat tether anchor cover

1. Using a screwdriver, detach the 4 claws and remove the cover.

Tape the screwdriver tip before use.

2. Remove roof headlining assembly

It is not necessary to completely remove the roof headlining. Slightly lower the rear section of the roof headlining.

1. 1
   Partially remove the roof headlining (see page ir- 26).
2. 2
   Remove child restraint seat tether anchor bracket
3. 3
   Remove the bolt and bracket.
4. 4
   Remove child restraint seat protector

   

1. 1
   Install child restraint seat protector
2. 2
   Install child restraint seat tether anchor bracket

   

1. 1
   Align the claws with the positioning holes, and install the bracket with the bolt.
2. 2
   Install roof headlining assembly
3. 3
   Install the roof headlining (see page ir-49).
4. 4
   Install child restraint seat tether anchor cover

   

1. Install the cover with the 4 claws.