Rear seat inner belt assembly

Components

Removal

1. 1
   Remove rear seat leg cover
2. 2
   Remove rear no. 2 Seat leg side cover
3. 3
   Remove rear no. 3 Seat leg side cover (w/ rear no. 2 Seat) (see page se-81)
4. 4
   Remove rear no. 3 Seat leg side cover (w/o rear no. 2 Seat) (see page se-81)
5. 5
   Remove rear no. 4 Seat leg side cover
6. 6
   Remove rear no. 5 Seat leg side cover
7. 7
   Remove rear seat lap type belt assembly center rh (w/o rear no. 2 Seat)

   

1. 1
   Remove the bolt and seat belt.
2. 2
   Remove rear seat lap type belt assembly center rh (w/ rear no. 2 Seat)

   

1. 1
   Remove the bolt and seat belt.
2. 2
   Remove rear no. 1 Seat assembly lh (see page se-50)
3. 3
   Remove rear seat rear bracket cover lh (see page se-54)
4. 4
   Remove rear seat lap type belt assembly center lh

   

1. 1
   Remove the bolt and the seat belt.
2. 2
   Remove rear seat inner belt assembly rh (for 60/40 split seat type lh side)

   

1. 1
   Remove the bolt and the seat belt.
2. 2
   Remove rear no. 1 Seat assembly rh (see page se-84)
3. 3
   Remove rear seat inner belt assembly rh (for 60/40 split seat type rh side)

   

1. 1
   Remove the bolt and the seat belt.
2. 2
   Remove no. 2 Seat hinge cover lh (w/ rear no.

   2 Seat) (see page se-109)

3. 3
   Remove no. 2 Seat leg cover (w/ rear no. 2 Seat) (see page se-109)
4. 4
   Remove rear no. 2 Seat assembly lh (w/ rear no. 2 Seat) (see page se-110)
5. 5
   Remove rear no. 2 Seat reclining cover lh (w/ rear no. 2 Seat) (see page se-111)
6. 6
   Remove rear no. 2 Seat inner belt assembly lh (w/ rear no. 2 Seat)

   

1. Remove the bolt and seat belt.

Installation

1. Install rear no. 2 Seat inner belt assembly lh (w/ rear no. 2 Seat)

1. 1
   Install the seat belt with the bolt.
2. 2
   Install rear no. 2 Seat reclining cover lh (w/ rear no. 2 Seat) (see page se-121)
3. 3
   Install rear no. 2 Seat assembly lh (w/ rear no. 2 Seat) (see page se-121)
4. 4
   Install no. 2 Seat leg cover (w/ rear no. 2 Seat) (see page se-123)
5. 5
   Install no. 2 Seat hinge cover (w/ rear no. 2 Seat) (see page se-123)
6. 6
   Install rear seat inner belt assembly rh (for 60/40 split seat type rh side)
7. 7
   Install the belt with the bolt.

   

Torque: 42 n*m (428 kgf*cm, 31 ft.*Lbf) Torque: 42 n*m (428 kgf*cm, 31 ft.*Lbf)

1. 1
   Install rear no. 1 Seat assembly rh (see page se-97)
2. 2
   Install rear seat inner belt assembly rh (for 60/40 split seat type lh side)

   

1. 1
   Install the belt with the bolt.
2. 2
   Install rear seat lap type belt assembly center lh

   

Torque: 42 n*m (428 kgf*cm, 31 ft.*Lbf)

1. 1
   Install the belt with the bolt.
2. 2
   Install rear seat rear bracket cover lh (see page se-60)
3. 3
   Install rear no. 1 Seat assembly lh (see page se-64)
4. 4
   Install rear seat lap type belt assembly center rh (w/o rear no. 2 Seat)

   

Torque: 42 n*m (428 kgf*cm, 31 ft.*Lbf)

1. Install the belt with the bolt.

Torque: 42 n*m (428 kgf*cm, 31 ft.*Lbf) Notice:

The anchor part of the seat belt must not overlap the protruding part.

13. Install rear seat lap type belt assembly center rh (w/ rear no. 2 Seat)

1. Install the belt with the bolt.

Torque: 42 n*m (428 kgf*cm, 31 ft.*Lbf) Notice:

The anchor part of the seat belt must not overlap the protruding part.

1. 1
   Install rear no. 5 Seat leg side cover
2. 2
   Install rear no. 4 Seat leg side cover
3. 3
   Install rear no. 3 Seat leg side cover (w/ rear no. 2 Seat) (see page se-72)
4. 4
   Install rear no. 3 Seat leg side cover (w/o rear no. 2 Seat) (see page se-72)
5. 5
   Install rear no. 2 Seat leg side cover
6. 6
   Install rear seat leg cover