Toyota RAV4 Quiz
Engine immobiliser

Dtc check / clear

In this manual: Engine immobiliser
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
9steps
~54min
2/5difficulty
Done 0 of 9
  1. Check dtc
Toyota RAV4. Check dtc

  1. Connect the intelligent tester (with can vim) to the dlc3.
  2. Turn the ignition switch on and turn the intelligent tester on.
  3. Select the following menu items: diagnosis / obd/mobd / immobiliser / dtc info / current codes.
  4. Check dtcs and then write them down.
Hint:

Refer to the intelligent tester operator's manual for further details.

  1. Confirm the details of the dtcs (see page ei-20).
  2. Clear dtc
  3. Connect the intelligent tester (with can vim) to the dlc3.
  4. Turn the ignition switch on (do not start the engine) and turn the intelligent tester on.
  5. Select the following menu items: diagnosis / obd/mobd / immobiliser / dtc info / clear codes.
Hint:

Refer to the intelligent tester operator's manual for further details.

  1. Erase dtcs by pressing the yes button on the tester.
Hint:

Refer to the intelligent tester operator's manual for further details.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.