Supplemental restraint system
Dtc check / clear
In this manual: Supplemental restraint system
7steps
~42min
2/5difficulty
Done 0 of 7
- Check dtc
- When dtc b1650/23 is detected as a result of troubleshooting for the airbag system, troubleshoot the occupant classification system.
- Use the intelligent tester (with can vim) to read and clear dtcs, otherwise the dtcs cannot be read and cleared.

- Connect the intelligent tester (with can vim) to the dlc3.
- Turn the ignition switch on.
- Check for dtcs by following the prompts on the tester screen.
Refer to the intelligent tester operator's manual for further details.
- Clear dtc
- Connect the intelligent tester (with can vim) to the dlc3.
- Turn the ignition switch on.
- Clear the dtcs by following the prompts on the tester screen.
Refer to the intelligent tester operator's manual for further details.
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?