Supplemental restraint system

Installation

6steps
~36min
2/5difficulty
Done 0 of 6
Caution: Be sure to read the precautionary notices concerning the srs airbag system before servicing it (see page rs-1).
  1. Install roof side rail bracket lh
Toyota RAV4. Install roof side rail bracket lh

  1. Install the bracket with the 2 bolts.
  2. Install curtain shield airbag assembly lh
    Toyota RAV4. Install curtain shield airbag assembly lh
Torque: 14 n*m (143 kgf*cm, 10 ft.*Lbf)
  1. Install the curtain shield airbag with the 10 bolts.
Torque: 14 n*m (143 kgf*cm, 10 ft.*Lbf) Notice:

Do not twist the curtain shield airbag when installing it.

  1. Connect the connector.
Notice:

When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Install roof headlining assembly (see page ir-50)
  2. Connect cable to negative battery terminal
  3. Check srs warning light
  4. Check the srs warning light (see page rs-34).

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.