Installation

1. 1
   Install front bumper side retainer lh
2. 2
   Install the clip and bumper side retainer.
3. 3
   Install the bolt.
4. 4
   Install front bumper side retainer rh

   

Torque: 6.0 N*m (61 kgf*cm, 53 in.*Lbf)
Hint:

Use the same procedures described for the lh side.

1. 1
   Install front bumper reinforcement
2. 2
   Install the reinforcement with the 8 bolts.

   

Torque: 70 n*m (713 kgf*cm, 51 ft.*Lbf)

1. 1
   Install the wire harness and attach the 5 claws.
2. 2
   Install front bumper retainer

   

1. Install the bolt with the retainer.

1. 1
   Install no. 2 Front bumper energy absorber
2. 2
   Install the absorber.
3. 3
   Install front bumper cover
4. 4
   Put protective tape under the front fender and headlight.
5. 5
   Install the 4 clips.

   

1. 1
   Install the hood cushion center.
2. 2
   W/ fog light: connect the 2 fog light connectors.

   

5. Attach the 4 claws to install the bumper cover.

1. 1
   Install the 8 screws.
2. 2
   Install radiator support opening cover

   

1. 1
   Install the 2 clips.
2. 2
   Install radiator grille protector

   

1. 1
   Install the 2 radiator grille protectors.
2. 2
   Install front fender liner lh

   

1. 1
   Install the fender liner with the fender liner retainer.
2. 2
   W/ splash shield: install the front fender splash shield lh.
3. 3
   Install the screw, nut and bolt.
4. 4
   Install front fender liner rh

Hint:

Use the same procedures described for the lh side.

11. Connect cable to negative battery terminal