Adjustment

HINT:

• On the RH side, use the same procedures as on the LH side.
• Since a centering bolt is used as a door hinge mounting bolt on the body side and the door side, the door can not be adjusted with it on. Substitute a bolt with a washer for the centering bolt.

1. INSPECT FRONT DOOR PANEL SUB-ASSEMBLY LH

1. Check that the clearance is within the standard range.

Standard

2. ADJUST FRONT DOOR PANEL SUB-ASSEMBLY LH

1. 1
   Using SST, horizontally and vertically adjust the door by loosening the body side hinge bolts.

   SST 09812-00010, 09812-00020

2. 2
   Tighten the door side hinge bolts after the adjustment.

   Torque: 26 N*m (265 kgf*cm, 19 ft.*lbf)

   

3. 3
   Adjust the door forward / rearward and vertically by loosening the door side hinge bolts.
4. 4
   Tighten the door side hinge bolts after the adjustment.

   Torque: 26 N*m (265 kgf*cm, 19 ft.*lbf)

   

5. 5
   Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic-faced hammer.
6. 6
   Tighten the striker mounting screws after the adjustment.

   Torque: 23 N*m (235 kgf*cm, 17 ft.*lbf)