Toyota Sienna Quiz
Tire and wheel

Confirmation of transmitter id registration

In this manual: Tire and wheel
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

(a) Make sure that the ignition switch is off.

(b) Connect the intelligent tester to DLC3.

(c) Turn the ignition switch to the ON position.

(d) Select "TIREPRESS" by following the prompts displayed on the intelligent tester.

(e) Confirm that the data of tire pressure of all tires are displayed on the intelligent tester screen.

NOTICE:

  • It may take about 5 to 6 minutes to update the tire pressure data.

  • If the IDs have not been registered, DTC C2171/71 is set in the tire pressure warning ECU after 3 minutes or more.

  • If normal pressure values are displayed, the IDs have been registered correctly.

  • If the tire pressure values are not displayed after several minutes, the IDs may be incorrect or the system may have a malfunction.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.