Toyota Sienna Quiz
Brake control

Disassembly

In this manual: Brake control
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. REMOVE STOP LIGHT SWITCH ASSEMBLY

(a) Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.

(b) Remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.

2. REMOVE STOP LIGHT SWITCH CUSHION

(a) Remove the stop light switch cushion from the brake pedal sub-assembly.

3. REMOVE BRAKE PEDAL

(a) Remove the 2 brake pedal shafts, 2 nuts and brake pedal from the brake pedal support sub-assembly.

4. REMOVE BRAKE PEDAL BUSH

(a) Remove the 4 brake pedal bushes from the brake pedal.

5. REMOVE BRAKE PEDAL SHAFT COLLAR

(a) Remove the 2 brake pedal shaft collars from the brake pedal.

6. REMOVE PUSH ROD PIN

(a) Using a screwdriver, remove the 2 E-rings, 2 push rod pins and 2 plates from the brake pedal.

(b) Remove the 2 push rod bushes.

7. REMOVE BRAKE PEDAL PAD

REMOVE BRAKE PEDAL PAD

(a) Remove the brake pedal pad to the brake pedal sub-assembly.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.