Toyota Sienna Quiz
Air conditioning

Disassembly

In this manual: Air conditioning
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. REMOVE AIR REFINER ELEMENT

REMOVE AIR REFINER ELEMENT

(a) Release the 2 claw fittings and remove the air filter sub-assembly.

REMOVE AIR REFINER ELEMENT

(b) Remove the air refiner element from the air filter cover plate.

2. REMOVE COOLING UNIT DAMPER SERVO SUBASSEMBLY

REMOVE COOLING UNIT DAMPER SERVO SUBASSEMBLY

(a) Remove the 3 screws and the cooling unit damper servo sub-assembly.

3. REMOVE BLOWER RESISTOR (for Manual Air Conditioning System)

REMOVE BLOWER RESISTOR (for Manual Air Conditioning System)

(a) Remove the 2 screws and the blower resistor.

4. REMOVE BLOWER MOTOR CONTROL (for Automatic Air Conditioning System)

REMOVE BLOWER MOTOR CONTROL (for Automatic Air Conditioning System)

(a) Remove the 2 screws and the blower motor control.

5. REMOVE BLOWER WITH FAN MOTOR SUBASSEMBLY

REMOVE BLOWER WITH FAN MOTOR SUBASSEMBLY

(a) Remove the 3 screws and the blower w/ fan motor sub-assembly.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.