Air conditioning
Disassembly
In this manual: Air conditioning
~1min read
1. REMOVE COOLER THERMISTOR NO.1 (for Automatic Air Conditioning System)

(a) Disengage the 2 claw fittings and the clamp and remove the cooler thermistor No. 1.
2. REMOVE COOLING UNIT MOTOR SUB-ASSEMBLY WITH FAN

(a) Remove the 3 screws and the cooling unit motor sub-assembly w/ fan.
3. REMOVE BLOWER RESISTOR TRANSISTOR ASSEMBLY

(a) Remove the 2 screws and the blower resistor transistor assembly.
4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

(a) Disengage the claw fitting and remove the 3 screws and blower case.

(b) Remove the 2 screws and the 2 clamps.

(c) Remove the 3 screws and the heater water valve assembly.
(d) Remove the 2 O-rings from the heater water valve assembly.

(e) Remove the heater radiator unit sub-assembly from the air conditioning blower assembly.
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?