Toyota Sienna Quiz
Seat

Disassembly

In this manual: Seat
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
12steps
~72min
3/5difficulty
Done 0 of 12

1. REMOVE RH SEAT REAR SEAT RECLINING COVER

REMOVE RH SEAT REAR SEAT RECLINING COVER
  1. Remove the 2 screws.
  2. Remove the RH seat rear seat reclining cover by pulling it out in the arrow mark direction shown in the illustration.

2. REMOVE LH SEAT REAR SEAT RECLINING COVER

REMOVE LH SEAT REAR SEAT RECLINING COVER
  1. Remove the 2 screws.
  2. Remove the LH seat rear seat reclining cover by pulling it out in the arrow mark direction shown in the illustration.

3. REMOVE REAR SEATBACK ASSEMBLY LH

  1. Disengage the reclining remote control cable.
  2. Disengage the rear seat lock release strap cable.
  3. Remove the 4 bolts and rear seatback assembly LH.

4. REMOVE REAR NO. 2 SEAT LAP BELT ASSEMBLY CENTER WITH INNER LH

  1. Remove the bolt and rear No. 2 seat lap belt assembly center with inner LH.

5. REMOVE NO. 2 REAR SEAT COVER BEZEL

  1. Remove the 5 screws and cover bezel.

6. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL

  1. Remove the screw and No. 2 seatback lock control bezel.

7. REMOVE NO. 2 SEATBACK COVER LH

REMOVE NO. 2 SEATBACK COVER LH
  1. Disengage the claw and remove the 4 headrest supports.
  2. Remove the hog rings and seatback cover together with the pad.
  3. Remove the hog rings and No. 2 seatback cover LH.

8. REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY

REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY
  1. Remove the nut and rear seat lock release strap assembly.

9. REMOVE REAR SEATBACK CONNECTING LH WIRE

  1. Remove the screw and rear seatback connecting LH wire.

10. REMOVE RECLINING RELEASE HANDLE SUBASSEMBLY LH

  1. Remove the nut and reclining release handle subassembly LH.

11. REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

  1. Remove the nut and No. 2 reclining adjuster release handle LH.

12. REMOVE REAR SEAT INNER BELT ASSEMBLY LH

  1. Remove the bolt and rear seat inner belt assembly LH.

13. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

  1. Remove the bolt and rear No. 2 seat inner belt assembly LH.

14. REMOVE NO. 2 SEAT CUSHION COVER SUBASSEMBLY LH

  1. Remove the hog rings and cushion cover together with the pad.
  2. Remove the hog rings and No. 2 seat cushion cover sub-assembly LH.

15. REMOVE LOCUS CABLE LH

  1. Remove the nut and locus cable LH.

16. REMOVE NO. 2 SEAT CUSHION SPRING ASSEMBLY LH

17. REMOVE REAR SEAT STAY SUB-ASSEMBLY

  1. Remove the nut and rear seat stay sub-assembly.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.