Toyota Sienna Quiz
Seat

Installation

In this manual: Seat
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

  1. Place the rear No. 2 seat assembly LH in the cabin.
NOTICE: Be careful not to damage the body.
  • Install the rear No. 2 seat assembly LH with the 2 bolts.

    Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)

  • Install the locus cable with the bolt.

    Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)

  • Install the 2 headrests.

    • HINT: Check that the seat leg locks.

    2. INSTALL REAR SEAT LEG SIDE GARNISH SUBASSEMBLY LH

    INSTALL REAR SEAT LEG SIDE GARNISH SUBASSEMBLY LH
    1. Engage the clips to install the rear seat leg side garnish sub-assembly.

    Test yourself

    A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.