Drive information

Items displayed can be switched by pressing the “DISP” switch.

• Current fuel economy Displays the current rate of fuel consumption.

  Use the displayed current fuel consumption as a reference.

• Average fuel economy Displays the average fuel consumption since the function was reset respectively.*

Use the displayed average fuel consumption as a reference.

*: Press and hold the “DISP” switch to reset.

• Distance

Displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the function was reset respectively.

• This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not be updated.

  When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.

• Setting The settings of the following items can be changed, refer to

• Eco Driving Indicator Light Select to activate/deactivate the Eco Driving Indicator Light.

• Display off

A blank screen is displayed.

Setting display automatic cancelation

In the following situations, setting display in which the settings can be changed through the “DISP” switch will automatically be turned off.

• If a warning message appears while the setting display is displayed
• When the vehicle begins to move while the setting display is displayed

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.

Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.