Toyota Sienna Quiz
Air conditioning

Dtc check / clear

In this manual: Air conditioning
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. DTC CHECK (SENSOR CHECK)

DTC CHECK (SENSOR CHECK)

(a) After the indicator check is completed, the system enters the DTC check mode automatically.

(b) Read the codes displayed on the panel. Refer to the list of codes (See page AC-19) when reading the codes. (Trouble codes are output at the temperature display.)

DTC CHECK (SENSOR CHECK)

(c) If the slower display is desired, press the DEF switch and change it to the step operation. Each time the DEF switch is pressed, the display changes by 1 step.

2. CLEARING DTC

CLEARING DTC

(a) To clear diagnostic trouble codes, there are 2 ways.

(1) During sensor check, press the "DEF" switch and "A/C" switch at the same time.

(2) Remove the ECU-B fuse in the engine room junction block for 20 seconds or longer to clear the DTC memory.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.