Toyota Sienna Quiz
Door lock

Front door lock

In this manual: Door lock
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

INSPECTION

1. INSPECT FRONT DOOR W/ MOTOR LOCK ASSEMBLY LH

INSPECT FRONT DOOR W/ MOTOR LOCK ASSEMBLY LH
  1. Apply battery voltage to the door lock and check operation of the motor.

OK

OK

HINT: If the result is not as specified, replace the door lock assembly.

  1. Measure the resistance according to the value(s) in the table below.

Standard resistance

Standard resistance

HINT: If the result is not as specified, replace the door lock assembly.

INSPECT FRONT DOOR W/ MOTOR LOCK ASSEMBLY LH
  1. Measure the resistance according to the value(s) in the table below.

Standard resistance

Standard resistance

HINT: If the result is not as specified, replace the door lock assembly.

2. INSPECT FRONT DOOR LOCK W/ MOTOR ASSEMBLY RH

INSPECT FRONT DOOR LOCK W/ MOTOR ASSEMBLY RH
  1. Apply battery voltage to the door lock and check operation of the motor.

OK

OK

HINT: If the result is not as specified, replace the door lock assembly.

  1. Measure the resistance according to the value(s) in the table below.

Standard resistance

Standard resistance

HINT: If the result is not as specified, replace the door lock assembly.

INSPECT FRONT DOOR LOCK W/ MOTOR ASSEMBLY RH
  1. Inspect the resistance of the door lock and unlock switch.

Standard resistance

Standard resistance

HINT: If the result is not as specified, replace the door lock assembly

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.