Door lock
Rear door lock
In this manual: Door lock
~1min read
INSPECTION
1. INSPECT REAR DOOR LOCK ACTUATOR ASSEMBLY LH

- Apply battery voltage to the door lock and check operation of the motor.
OK

HINT: If the result is not as specified, replace the door lock assembly.
- Measure the resistance according to the value(s) in the table below.
Standard resistance

HINT: If the result is not as specified, replace the door lock assembly.
2. INSPECT REAR DOOR LOCK ACTUATOR ASSEMBLY RH

- Apply battery voltage to the door lock and check operation of the motor.
OK

HINT: If the result is not as specified, replace the door lock assembly.
- Measure the resistance according to the value(s) in the table below.
Standard resistance

HINT: If the result is not as specified, replace the door lock assembly.
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?