Toyota Sienna Quiz
Wiper and washer

Front wiper rubber

In this manual: Wiper and washer
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
2steps
~12min
1/5difficulty
Done 0 of 2

COMPONENTS

COMPONENTS

REMOVAL

1. REMOVE FRONT WIPER BLADE

  1. Remove the front wiper blade from the front wiper arm LH.

NOTICE: Do not fold down the front wiper arm with the front wiper blade being removed from it.

2. REMOVE FRONT WIPER RUBBER

  1. Remove the front wiper rubber from the front wiper blade.
  2. Remove the 2 wiper rubber backing plates from the front wiper rubber.

INSTALLATION

1. INSTALL FRONT WIPER RUBBER

INSTALL FRONT WIPER RUBBER
  1. Install the wiper rubber backing plates to the front wiper rubber.

NOTICE: Be careful about the right side and the wrong side of the backing plates.

INSTALL FRONT WIPER RUBBER
  1. Install the front wiper rubber so that the head part (Larger side) of the wiper rubber faces the arm axle side.

NOTICE: Push the front wiper blade into the grooves of the wiper rubber to engage them completely.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.