Toyota Sienna Quiz
Mirror

Inspection

In this manual: Mirror
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
20steps
~120min
4/5difficulty
Done 0 of 20

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Memory)

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
  1. Disconnect the mirror connector.
  2. Check operation of the outer mirror.
  3. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (LH)

Standard

If the result is not as specified, replace the mirror assembly.

2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Memory)

  1. Disconnect the mirror connector.
    INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
  2. Check operation of the outer mirror.
  3. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (RH)

Standard

If the result is not as specified, replace the mirror assembly.

3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Memory)

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
  1. Disconnect the mirror connector.
  2. Check operation of the outer mirror.
  3. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (LH)

Standard

If the result is not as specified, replace the mirror assembly.

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
  1. Check operation of the EC mirror.
  2. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (LH)

Standard (LH)

If the result is not as specified, replace the mirror assembly.

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
  1. Check of the retract function.
  2. Apply battery voltage and inspect operation of the mirror, as shown in the table and illustration.

Standard (LH)

Standard

If the result is not as specified, replace the mirror assembly.

4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Memory)

  1. Disconnect the mirror connector.
  2. Check operation of the outer mirror.
    INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
  3. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (RH)

Standard

If the result is not as specified, replace the mirror assembly.

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
  1. Check operation of the EC mirror.
  2. Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (RH)

Standard

If the result is not as specified, replace the mirror assembly.

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
  1. Check of the retract function.
  2. Apply battery voltage and inspect operation of the mirror, as shown in the table and illustration.

Standard (RH)

Standard

If the result is not as specified, replace the mirror assembly.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.