Toyota Sienna Quiz
Engine

Inspection

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSPECT PURGE VSV

INSPECT PURGE VSV

(a) Measure the resistance of the purge VSV.

Standard resistance

If the result is not as specified, replace the purge VSV.

INSPECT PURGE VSV

(b) Check the operation of the purge VSV.

(1) Check that air does not flow from port E to port F.

INSPECT PURGE VSV

(2) Apply battery voltage across the terminals.

(3) Check that air flows from port E to port F.

If the result is not as specified, replace the purge VSV.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.