Toyota Sienna Quiz
Seat

Installation

In this manual: Seat
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL FRONT SEAT ASSEMBLY RH

  1. Place the seat assembly in the cabin.
NOTICE: Be careful not to damage the body.
  • Connect the connectors under the seat assembly.
  • Tighten the 2 bolts on the front side of the seat assembly.

    Torque: 37 N*m (375 kgf*cm, 27 ft.*lbf)

  • Tighten the 2 bolts on the rear side of the seat assembly.

    Torque: 37 N*m (375 kgf*cm, 27 ft.*lbf)

  • Install the 2 track covers.

    • 2. INSTALL FRONT SEAT HEADREST ASSEMBLY

    3. CHECK SRS WARNING LIGHT

    4. CHECK SEAT SLIDE ADJUSTER LOCKS

    5. INITIALIZE OCCUPANT CLASSIFICATION SYSTEM

    Test yourself

    A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.