Toyota Sienna Quiz
Seat

Installation

In this manual: Seat
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL REAR NO. 2 SEAT ASSEMBLY RH

  1. Place the rear No. 2 seat assembly RH in the cabin.
NOTICE: Be careful not to damage the body.
  • Install the seat with the bolt.

    Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)

  • Install the locus cable RH with the bolt.

    Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)

  • Install the rear seat headrest assembly RH.

    • HINT: Check that the seat leg locks.

    2. INSTALL REAR SEAT LEG SIDE GARNISH SUBASSEMBLY RH

    1. Install the rear seat leg side garnish sub-assembly RH.

    Test yourself

    A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.