Toyota Sienna Quiz
Engine

Installation

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. Install thermostat

Install thermostat

(a) Install a new gasket to the thermostat.

(b) Install the thermostat with the jiggle valve facing up.

Hint: the jiggle valve may be set within 10° on either side of the prescribed position.

2. INSTALL WATER INLET

INSTALL WATER INLET

(a) Install the water inlet with the 2 nuts .

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

3. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

(a) Install the idler pulley cover plate and idler pulley sub-assembly with the bolt.

Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)

4. CONNECT NO. 2 RADIATOR HOSE

CONNECT NO. 2 RADIATOR HOSE

(a) Connect the No. 2 radiator hose to the engine.

5. INSTALL V-RIBBED BELT (See page EM-7) 6. INSTALL FRONT FENDER APRON SEAL RH 7. INSTALL FRONT WHEEL RH 8. ADD ENGINE COOLANT (See page CO-7) 9. INSTALL NO. 1 ENGINE UNDER COVER (See page EM-63) 10. INSPECT FOR COOLANT LEAK (See page CO-1) 11. INSTALL V-BANK COVER SUB-ASSEMBLY (See page EM-63)

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.