Engine

Removal

~1min read

1. REMOVE V-BANK COVER SUB-ASSEMBLY (See page EM-28) 2. REMOVE NO. 1 ENGINE UNDER COVER (See page EM-26) 3. DRAIN ENGINE COOLANT (See page CO-6) 4. REMOVE FRONT WHEEL RH 5. REMOVE FRONT FENDER APRON SEAL RH 6. REMOVE V-RIBBED BELT (See page EM-6) 7. DISCONNECT NO. 2 RADIATOR HOSE

DISCONNECT NO. 2 RADIATOR HOSE

(a) Disconnect the No. 2 radiator hose from the engine.

8. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

(a) Remove the bolt, idler pulley cover plate and idler pulley sub-assembly.

9. REMOVE WATER INLET

(a) Remove the 2 nuts and water inlet.

10. REMOVE THERMOSTAT

REMOVE THERMOSTAT

(a) Remove the gasket from the thermostat.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.