Installation

1. INSTALL SPARK PLUG

(a) Install the 6 spark plugs.

Torque: 18 N*m (183 kgf*cm, 13 ft.*lbf)

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 6 ignition coils with the 6 bolts.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) (b) Connect the 6 ignition coil connectors.

3. INSTALL NO. 1 SURGE TANK STAY

NOTICE: DO NOT apply oil to the bolt listed below:

(a) Install the No. 1 surge tank stay with the bolt.

Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)

(b) Install the 2 bolts, 2 clamps, and nut.

Torque: 8.3 N*m (84 kgf*cm, 73 in.*lbf)

4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See page FU-19) 5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See page FU-20) 6. ADD ENGINE COOLANT (See page CO-7) 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 8. INSPECT FOR ENGINE COOLANT LEAK (See page CO-1) 9. INSTALL V-BANK COVER SUB-ASSEMBLY (See page EM-63) 10. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER FRONT (See page FU-21) 11. INSTALL NO. 1 COWL TOP TO COWL BRACE INNER (See page FU-21)

12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (See page WW-6)

13. INSTALL FRONT WIPER ARM LH (See page WW-6)

14. INSTALL FRONT WIPER ARM RH (See page WW-7)