Toyota Sienna Quiz
Engine

Installation

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL STARTER ASSEMBLY

INSTALL STARTER ASSEMBLY

(a) Install the starter with the 2 bolts.

Torque: 37 N*m (380 kgf*cm, 26 ft.*lbf) for bolt

INSTALL STARTER ASSEMBLY

(b) Connect the starter connector.

(c) Install the terminal nut and cover the nut with the cap.

Torque: 9.8 N*m (100 kgf*cm, 7 ft.*lbf) for nut

2. INSTALL NO. 1 AIR CLEANER INLET

INSTALL NO. 1 AIR CLEANER INLET

(a) Install the No. 1 air cleaner inlet with the bolt.

Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)

3. INSTALL AIR CLEANER BRACKET

INSTALL AIR CLEANER BRACKET

(a) Remove the 2 bolts and air cleaner bracket.

Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf)

4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See page EM-59) 5. INSTALL AIR CLEANER FILTER ELEMENT (See page EM-59) 6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See page FU-20) 7. INSTALL NO. 2 AIR CLEANER INLET (See page EM- 60) 8. INSTALL BATTERY (See page EM-59)

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.