Toyota Sienna Quiz
Transfer

Installation

In this manual: Transfer
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read
3special tools

1. INSTALL TRANSFER CASE OIL SEAL

INSTALL TRANSFER CASE OIL SEAL

(a) Using SST, install anew transfer case oil seal to the transfer case at the position shown in the illustration.

SST 09387-00010, 09950-70010 (09951-07150)

NOTICE: Do not install it obliquely.

(b) Apply small amount of MP grease to the oil seal lip.

2. INSTALL CTR DIFFERENTIAL LOCK SLEEVE

HINT: (See page TF-22)

3. INSTALL TRANSFER ASSEMBLY

HINT: (See page TF-9)

4. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER

HINT: See page AX-167

5. INSTALL ENGINE AND TRANSAXLE

HINT: (See page EM-44)

6. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

HINT: (See page SP-4)

7. CHECK ABS SPEED SENSOR SIGNAL

HINT: (See page BC-3)

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.