Supplemental restraint system
On-vehicle inspection
In this manual: Supplemental restraint system
4steps
~24min
2/5difficulty
Done 0 of 4
1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

- Perform a diagnostic system check.
- With the curtain shield airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front pillar garnish RR window side garnish assembly No. 2 or roof headlining assembly with a new one: Cuts, minute cracks or marked discoloration on the front pillar garnish RR window side garnish assembly No. 2 or roof headlining assembly around the curtain shield airbag assembly.
2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

- Perform a diagnostic system check.
- With the curtain shield airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag assembly with a new one:
- Cuts, minute cracks or marked discoloration on the curtain shield airbag assembly.
- Cracks or other damage to the connector.
CAUTION: Be sure to follow the correct removal and installation procedures.
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?