Supplemental restraint system
On-vehicle inspection
In this manual: Supplemental restraint system
4steps
~24min
2/5difficulty
Done 0 of 4
1. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

- Perform a diagnostic system check.
- With the front passenger airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel with a new one: Cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag assembly.
2. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

- Perform a diagnostic system check.
- With the front passenger airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front passenger airbag assembly, instrument panel or instrument panel reinforcement with a new one:
- Cuts, minute cracks or marked discoloration on the front passenger airbag assembly.
- Cracks or other damage to the connectors.
- Deformation or cracks on the instrument panel or instrument panel reinforcement.
HINT: There should be no interference between the instrument panel and the front passenger airbag assembly.
CAUTION: Be sure to follow the correct removal and installation procedures.
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?