Toyota Sienna Quiz
Axle

Removal

In this manual: Axle
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

HINT: Replace the RH side by the same procedures as the LH side.

1. REMOVE REAR WHEEL

2. REMOVE REAR DISC BRAKE CALIPER ASSEMBLY LH

(a) Removing the 2 bolts, separate the rear disc brake caliper assembly LH for disc rear brake type.

NOTICE: Using a string and so on, hang down the disc brake caliper.

3. REMOVE REAR DISC

(a) Remove rear disc for disc rear brake type.

4. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

(a) Remove rear brake drum sub-assembly for drum rear brake type.

5. SEPARATE SKID CONTROL SENSOR WIRE

(a) Disconnect the connector

6. REMOVE REAR AXLE HUB & BEARING ASSEMBLY LH

REMOVE REAR AXLE HUB & BEARING ASSEMBLY LH

(a) Remove the 4 bolts and hub & bearing assembly LH.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.