Toyota Sienna Quiz
Suspension

Removal

In this manual: Suspension
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT: (See page EM-34)

2. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR

(a) Remove the 3 nuts and transverse engine engine mounting insulator.

REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR

3. REMOVE FRONT SUSPENSION ARM SUBASSEMBLY LOWER NO.1 LH

REMOVE FRONT SUSPENSION ARM SUBASSEMBLY LOWER NO.1 LH

(a) Remove the 2 bolts on the front side of the front suspension arm sub-assembly lower No.1 LH.

REMOVE FRONT SUSPENSION ARM SUBASSEMBLY LOWER NO.1 LH

(b) Remove the bolt and nut on the rear side of the front suspension arm sub-assembly lower No.1 LH.

(c) Remove the front suspension arm sub-assembly lower No.1 LH.

(d) Remove the front lower arm bush stopper from the front suspension arm sub-assembly lower No.1 LH.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.