Toyota Sienna Quiz
Brake control

Removal

In this manual: Brake control
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

HINT:

  • Don't use the dropped or damaged yawrate sensor
  • Free from the foreign matters between yaerate sensor bracket and body.
  • Make sure the sensor direction.

1. REMOVE FRONT SEAT ASSEMBLY RH

HINT: See page SE-40.

2. REMOVE FRONT DOOR SCUFF PLATE RH

3. REMOVE COWL SIDE TRIM BOARD RH

(a) Remove the nut and cowl side trim board plate RH.

4. REMOVE YAW RATE AND DECELERATION SENSOR

REMOVE YAW RATE AND DECELERATION SENSOR

(a) Disconnect the yawrate sensor connector.

(b) Remove the 2 bolts and yawrate sensor.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.