Toyota Sienna Quiz
2GR-FE Engine control system

Removal

In this manual: 2GR-FE Engine control system
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
8steps
~48min
2/5difficulty
Done 0 of 8

1. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

2. REMOVE FRONT OUTER COWL TOP PANEL SUBASSEMBLY

3. DRAIN ENGINE COOLANT

4. REMOVE V-BANK COVER SUB-ASSEMBLY

5. REMOVE NO. 2 AIR CLEANER INLET

6. REMOVE NO. 1 AIR CLEANER INLET

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

10. REMOVE VVT SENSOR (for Bank 1 Intake Side)

REMOVE VVT SENSOR
  1. Disconnect the VVT sensor connector.
  2. Remove the bolt and VVT sensor.

11. REMOVE VVT SENSOR (for Bank 1 Exhaust Side)

REMOVE VVT SENSOR
  1. Disconnect the VVT sensor connector.
  2. Remove the bolt and VVT sensor.

12. REMOVE VVT SENSOR (for Bank 2 Intake Side)

REMOVE VVT SENSOR
  1. Disconnect the VVT sensor connector.
  2. Remove the bolt and VVT sensor.

13. REMOVE VVT SENSOR (for Bank 2 Exhaust Side)

REMOVE VVT SENSOR
  1. Disconnect the VVT sensor connector.
  2. Remove the bolt and VVT sensor.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.