Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

(a) Disconnect the sensor connector.

(b) Using SST, remove the sensor from the exhaust manifold.

SST 09224-00010

3. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Disconnect the heated oxygen sensor (for Bank 1 Sensor 2) connector under the center console.

(b) Remove the 2 bolts and 2 compression springs.

(c) Remove the 6 nuts and front exhaust pipe assembly.

4. REMOVE EXHAUST MANIFOLD RH

(a) Remove the nut, bolt and exhaust manifold stay.

(b) Disconnect the air fuel ratio sensor (for Bank 1 Sensor 1) connector.

(c) Remove the 6 nuts and exhaust manifold RH.

(d) Remove the gasket and exhaust manifold to head gasket.

5. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

(a) Using SST, remove the sensor.

SST 09224-00010