Toyota Sienna Quiz
U151e automatic transaxle

Removal

In this manual: U151e automatic transaxle
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read
4special tools

1. REMOVE FRONT WHEELS

2. REMOVE ENGINE UNDER COVER NO.1

3. DRAIN AUTOMATIC TRANSAXLE FLUID

(a) Remove the drain plug, gasket and drain ATF.

(b) Install a new gasket and the drain plug.

Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)

4. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

HINT: (See page DS-6)

SST 09520-01010, 09520-24010 (09520-32040)

5. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH (for 2WD)

HINT: (See page DS-6)

6. REMOVE TRANSAXLE HOUSING OIL SEAL

REMOVE TRANSAXLE HOUSING OIL SEAL

(a) Using SST, pull out the oil seal.

SST 09308-00010

7. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

(a) Using SST, pull out the oil seal.

SST 09308-00010

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.