Toyota Sienna Quiz
Transfer

Removal

In this manual: Transfer
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read
1special tools

1. DRAIN AUTOMATIC TRANSAXLE FLUID (See page AX-131)

2. REMOVE NO. 1 TRANSFER CASE PLUG (See page TF-8)

3. REMOVE TRANSFER DRAIN PLUG

(a) Remove the transfer drain plug, gasket and bleed the drain transfer oil.

4. REMOVE FRONT WHEEL

5. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

HINT: (See page DS-5)

6. REMOVE TRANSFER RH BEARING RETAINER OIL SEAL

REMOVE TRANSFER RH BEARING RETAINER OIL SEAL

(a) Using SST, remove the transfer RH bearing retainer oil seal.

SST 09308-00010

NOTICE: Do not damage the oil-seal-fitted surface of the case.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.