Toyota Sienna Quiz
Transfer

Removal

In this manual: Transfer
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. REMOVE ENGINE AND TRANSAXLE

HINT: (See page EM-26)

2. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER

HINT: (See page AX-164)

3. REMOVE NO. 1 TRANSFER CASE PLUG

REMOVE NO. 1 TRANSFER CASE PLUG

(a) Remove the No. 1 transfer case plug.

(b) Remove the No. 1 gasket from the transfer case No.

1 plug.

4. REMOVE NO. 2 TRANSFER CASE PLUG

(a) Remove the No. 2 transfer case plug.

(b) Remove the No. 2 gasket from the No. 2 transfer case plug.

5. REMOVE TRANSFER DRAIN PLUG

(a) Remove the transfer drain plug and bleed the oil.

(b) Remove the drain gasket from the transfer drain plug.

6. REMOVE TRANSFER ASSEMBLY

REMOVE TRANSFER ASSEMBLY

(a) Remove the 2 bolts and 6 bolts.

(b) Using a plastic hammer, remove the transfer assembly from the transaxle assembly.

NOTICE:

  • Remove the transfer assembly from the transaxle assembly without tilting it.
  • When removing the transfer assembly, do not hold onto the oil seal parts on both sides of the assembly.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.